S2 Smart Lock

The newest innovation in Intelligent security

S2 Smart Door Lock

Product Specification

Front panel size: 337mm*67mm*71.3mm(Including handle height)

Rear panel size: 337mm*67mm*71.3mm(Including handle height)

Guide plate size: 24mm × 240mm× 3mm(Standard)

Operating Voltage: 7.5 V (2 sets of 5 cells/set LR6 alkaline batteries)

Password capacity: 25 users, 5 temporary authorized users, each user can set fingerprints: 3 normal, 1 emergency; Password: 1 normal, 1 emergency, Card: 1 normal, 1 emergency;

Wifi networking: WiFi

Unlock method: Fingerprint, password, Phone NFC , Card, remote authorization, mechanical key

Smart alarm: Low voltage alarm, prying alarm, emergency unlocking alarm, unlocking verification failure alarm

Operating temperature: -20℃ ~ 60℃

Working humidity: 10% ~ 90%

Door lock material: Zinc alloy + stainless steel + tempered glass

Emergency power interface: Type C USB 5V

Smart Lock Functions

  • Finger print Unlock

    After entering the user's fingerprint, touch to verify the fingerprint to unlock. Perfect for emergency and dangerous situations.

  • Password unlock

    After entering the user password, enter the user password to verify unlock.

  • Card unlock

    After entering the user card, swipe the card in the swiping area to unlock

  • Void password

    When it is inconvenient, you can enter other numbers before and after the correct 6 digits. As long as 6 consecutive digits are consistent with the password, the lock can be unlocked. The virtual password can effectively prevent the password from being stolen

  • Door opening reminder

    After the door lock is connected to the Internet, the family members go home to open the door, and the App can receive the family door opening message reminder.

  • Temporary authorization

    After the door lock is connected to the Internet, remotely authorize the temporary unlocking password through the App.

  • Door lock status

    After the door lock is connected to the Internet, you can check the door lock status (door closed, locked, locked, power, etc.) through the App

  • Fortification away from home

    After closing the door and lifting the handle to lock, press 3 within 10 seconds and then press the unlock button to open the fortification away from home. After leaving home for defense, any unauthorized unlocking will trigger a protection alarm, and the protection will be released when the unlocking is verified.

  • Emergency power supply

    DesWhen the power of the door lock is insufficient and the electronic unlocking cannot work normally, the emergency power supply can be used to unlock the lock through the power bank + Type C line

  • Key unlocking

    When the door lock electronically fails, you can unlock the door with a key, insert the key, turn the key and press down the handle to unlock.

  • Reset

    Continuously press 4 times, press the Reset button for the fifth time to initialize the door lock settings.

Attention

Ÿ The key is used for abnormal emergency unlocking. Do not place it in your home, so you can use the key to unlock the door lock under abnormal conditions.

Ÿ Door locks need to be installed by professionals. After installation, please check the user. If you have any questions, please contact after sales service.

Ÿ Door locks is not waterproof.

Ÿ Make sure that the door lock is less than 10 meters away from the router and avoid wall occlusion to ensure proper network communication.

Ÿ When installing the battery, please note that the direction battery cannot be reversed.

Ÿ The door lock battery can't be mixed with old and new. When replacing the battery, be sure to replace all of them.

Ÿ This product is only suitable for use below 2000m above sea level, temperature -10~50℃ and environment humidity 10%~90%.

Previous
Previous

MixPad S

Next
Next

Smart Lock C1